GU Impex

The NEO-M8N provides the best performance and easiest RF integration of all the NEO-M8 configurations. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. NEO-M8 combines a high level of robustness and integration capability with flexible connectivity options. The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems.

NEO-M8N GPS Module for APM APM2.52 APM Flight Controller with Case and GPS Antenna Mount to protect the GPS preventing electromagnetic interference. A new generation GPS NEO-M8N GPS Module, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy. Support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more. The NEO-M8N and ceramic antenna make this a very accurate receiver, fast locks & lots of satellites, and the stand is very sturdy to protect the GPS preventing electromagnetic interference.

Features:

1.  GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
2.  SBAS L1 C/A: WAAS, EGNOS, MSAS
3.  Galileo-ready E1B/C (NEO-M8N)
4. Onboard Compass
5.  Assistance AssistNow GNSS Online
6.  AssistNow GNSS Offline (up to 35 days)
7.  AssistNow Autonomous (up to 6 days)
8.  OMA SUPL & 3GPP compliant
9.  Oscillator TCXO (NEO-M8N/Q),
10.  Crystal (NEO-M8M)
11.  RTC crystal Built-In
12.  Noise figure On-chip LNA (NEO-M8M). Extra LNA for
13.  lowest noise figure (NEO-M8N/Q)
14.  Anti-jamming Active CW detection and removal. Extra
15.  onboard SAW bandpass filter (NEO-M8N/Q)
16.  Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
17.  Supported antennas Active and passive
18.  Odometer Travelled distance
19.  Data-logger For position, velocity, and time (NEO-M8N)

1 x NEO M8N GPS for Pixhawk and APM flight controller
1 x Extra 5-pin Connector  for APM FC

This RS555 motor is one of the popular motors and is used commonly in various applications like printers, toys, some industrial gadgets, and PCB drilling machine-like things. This is the Brushed DC Motor. This motor will mount to any of the manufacturer’s stock P60 gearboxes. It has a round shaft connector. Its operating voltage is 5V-15V and this motor is 68.5% efficient. Great for the rusty or damaged DC motor on the machine. Comes with a magnetic shield (as shown in the image) To run this motor, you would need a 12 Volt DC Power supply. The Amperage rating on it should be 2 Amp or above. Alternatively, you can also directly connect it to a 12 Volt Battery. Perfect for various DIY applications Like a Drill machine, Water pump, etc. The main application of this motor is to build low RPM; high torque DC motors which are achieved by including gear-box reduction. We can decrease a base motor RPM from 16000 to 1 by just arranging an extra gearbox.

Appliances:

• Electric curtain, Integrated cooker, Coffee maker, Intelligent closestool, Sweeping robot, Dish-washing Machine, Cooker hood, Electric lock.
• Hair Care: Hair Curler, Massager, Electric Hair Clipper.
• Office Equipment: Shredder, Printer, Projector, Counting Machine.
• Medical Equipment: Massager Chair, Electric trolley, Medical pump, Electric bed, Ventilator, Electric wheelchair.
• Industrial Equipment: Water valve, Electrical valve, Gas valve, Air switch, Automatic door, Automatic
  lubrication equipment.
• Business Equipment: Vending Machines, Parking locks, ATM machines, stage lights.
• Intelligent Robot: Mechanical Arm, UAV(Unmanned Aerial Vehicle), Se

Packing List:

1 x RS555 18000RPM 12V Dc Motor

Specifications:

• Voltage: 12V
• RPM: 18000 approx.
• Amp Rating: 2 Amp (max 5 Amp)

If you are new in multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotors!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.

These lightweight brushed DC coreless motors are the best choice for your small drone, offering you an excellent affordable price when compared with costly BLDC motors.

This 8520 Magnetic Micro Coreless Motor is very compact and lightweight DC motor nicely crafted for perfectly matching with your small 100mm like multirotor frames.

They are rated at 39000 RPM which is more than needed to lift and push your drone to the target. These are less noisy with low resistance. The only drawback of using coreless is the amount of torque they provide, as they are High Speed and Low Torque motors.

• 65 mm Blade Propeller CW&CCW.
• 55 mm Blade Propeller CW&CCW.

8520 Magnetic Micro Coreless Motor with Red and the Blue wire is CW rotation motor & Black and the White wire is CCW rotation motor.

1. 8520 Coreless motor is High Speed and Low Torque motor.
2. Less noisy operation.
3. Offers low resistance.
4. They are equipped with high-quality magnets.
5. This coreless motor supports 1S battery.

2 x 8520 Magnetic Micro Coreless Motor (CW)

2 x 8520 Magnetic Micro Coreless Motor (CCW