Hyderabad, Telangana
GST No. 36BAAPA3282K1ZW
Call 08047309167 63% Response Rate
Send Enquiry
Product Brochure
| Power | 150 W |
| Module Properties | Non-isolated boost (BOOST) |
| Rectification | Non-Synchronous Rectification |
| Input Voltage Range | 3V ~ 32V |
| Output Voltage RAnge | 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) |
| Input Current | 4A (max), no-load 18mA |
| Conversion efficiency | <94% (greater the pressure, the lower the efficiency) |
| Switching frequency | 400KHz |
| Output Ripple | 50mV |
| Load Regulation | +- 0.5% |
| Operating Temperature | -40 ~ +85 DegreeC |
| Dimensions | 43mm * 21mm * 14mm (L * W * H) |
Description:-
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
Features:-
Test Results:-
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin * Iin * Efficiency = Vout * Iout
Vin: Input Voltage
Iin: Input current
Vout: Output Voltage
Iout: Output current
Technical Parameters:-
When using these modules remember that the output current will be a lot less than the input current, (remember - W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W.
View Complete details
Product Brochure
| Output Voltage | 1.2V |
| Model | 300W 10A Power Supply Module Step Down Buck Converter |
| Input Voltage | 7 ~ 40 V |
| Application | High-power LED driver |
| Conversion Efficiency | 95% |
| Current | 8A (10A maximum) |
| Output voltage (V) | Continuously adjustable (1.25 ~ 35) |
| Operating frequency | 300 KHz |
| Minimum pressure | 1V |
| Operating temperature | -40 to + 85 DegreeC |
| Dimensions | 65x47x22 (LxWxH) mm |
| Weight | 70 grams |
The 300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module can be used to get adjustable output voltage ranges from 1.5V to 35V.
With heat sink mounted it can easily manage to run high power application continuously.
The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20C to 100C constant current 1A, temperature drift less than 1%), and therefore it is particularly most suitable for LED driver applications
The output current of the module can be raised up to 10A
To enhance the stabilization in output voltage has four high-frequency capacitance which gives the lower output ripple. Double heat sink design provides easy and fast heat dissipation.
MOS Schottky diode independent heat sink, which heat dissipation is good, and wont affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.
Applications:
High-power LED driver.
Lithium battery (or lead accumulator) charge.
Vehicle-mounted power supply.
Low voltage system power supply.
6V, 12V, 14V, 24V battery charge.
On-board laptop power supply.
Regulated power supply.
Low voltage power supply system.
Note: If the module temperature exceeds 65C, please add a cooling fan, (It be used at room temperature without a fan)
Specification:-
Input Supply voltage (V): 7 ~ 40
Output voltage (V): Continuously adjustable (1.25 ~ 35)
Output Current (A): 8A (10A maximum)
Operating temperature(C): -40 to + 85
Conversion efficiency: 95%
Operating frequency (KHz): 300
No-load current: Typical 20mA
Load regulation: 1%
Voltage Regulation: 1%
Minimum pressure: 1V.
Length: 65mm
Width: 47mm
Height: 22mm
Weight: 70mm
Package Includes:-
1x 10A DC-DC Step-down Adjustable Constant Voltage Module.
View Complete details