GU Impex

MG995 Metal Gear Servo Motor is a high-speed standard servo can rotate approximately 180 degrees (60 in each direction) used for airplane, helicopter,  RC-cars and many RC model. Provides 10kg/cm at 4.8V, and 12kgcm at 6V. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.Wire Description:- RED – PositiveBrown – NegativeOrange – Signal   Specification :-Weight : 55gDimension : 40.7 × 19.7 × 42.9 mmOperating Speed (4.8V no load): 20sec / 60 deg Operating Speed (6.0V no load): 16sec / 60 deg ( no load)Stall Torque (4.8V): 10kg/cmStall Torque (6.0V): 12kg/cmOperation Voltage : 4.8 - 7.2VoltsGear Type: All Metal GearsStable and shock proof double ball bearing designDead band width: 5 µsTemperature range: 0 ºC – 55 ºC.Control System: AnalogOperating Angle: 120degreeRequired Pulse: 900us-2100usFeatures:-  The connection cable is thicker.Equips high-quality motor.High resolutionAccurate positioningFast control responseConstant torque throughout the servo travel rangeExcellent holding power.

12V 100 RPM Johnson Geared DC Motor – Grade A Quality

It is a simple DC motor featuring a metal gearbox for driving the shaft of the motor, so it is a mechanically commutated electric motor that is powered from DC supply. The Johnson Geared Motors are known for their compact size and massive torque-speed characteristic.

The Johnson Motor comes with side shaft also known as an off-centered shaft and six M3 mounting holes. The shaft of the motor equips metal bushes which makes these DC gear motors Shaft wear-resistant. The shaft of the motor has a hole for better coupling.

The motor will run smoothly between the voltage range 6 to 18 V DC and give you 100 RPM at 12V supply. It provides a torque of  6.5 kg-cm at 100 RPM.

The Johnson Geared Motor gives very good torque at an affordable price hence they are widely applicable in Pan/Tilt camera, auto shutter, welding machines, water meter IC card, grill, oven, cleaning machine garbage disposers, household appliances, slot machines, money detector, automatic actuator, coffee machine, Towel disposal, lighting coin refund devices, the peristaltic pump and so on.

We offer the range of Johnson motors with different RPM as shown below, click on RPM numbers for more information

Grade A Quality:   

5 – 540 N-cm
10 – 441 N-cm
20 – 294 N-cm
30 – 196 N-cm
60 – 167 N-cm
100 – 137 N-cm
200 – 69 N-cm
300 – 59 N-cm
600 – 25 N-cm

Made In India:   

10 – 117 N-cm
30 – 98 N-cm
60 – 73 N-cm
100 – 55 N-cm
200 – 38 N-cm
300 – 21 N-cm
500 – 9 N-cm
1000 – 7.8 N-cm

Features : 

1. Grade A Quality branded Johnson DC Motor.
2. It has sturdy construction.
3. Shaft equips metal bushes for a long life.
4. It comes with High-Quality gears.
5. The shaft has a hole for better coupling.

Package Includes :

1 x Johnson Geared Motor 100 RPM – Grade A Quality

1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator

This 1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator allows controlling the speed of a motor with fully adjustable 0%-100%. The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.

Application:

• This PWM Speed controller is for DC 6V 12V 24V 28V Motor.

Pinouts:

• Motor+: Motor Positive Terminal
• Motor-: Motor Negative terminal
• Power+: DC 6V – 28V
• Power-: Gnd

Note: Product Image May vary in terms of front knob or connector colour according to the availability

Features:

• Speed of a motor is fully adjustable
• DC 6V 12V 24V 28V Supported

Package Includes:

1 x 1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator

This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock- roofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec

This is a TowerPro MG995 Metal Gear Servo Motor (360° Continuous Rotation).

TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.

When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception…. These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price.

You can buy E Max Servos OR Orange servos if you’re seeking high-quality servos.

Wire Description

• RED – Positive
• Brown – Negative
• Orange – Signal

Features : 

1. High resolution
2. Accurate positioning
3. Fast control response
4. Constant torque throughout the servo travel range
5. Excellent holding power

Package Includes : 

1 x TowerPro MG995 Servo Motor with Cable

1 x Set of Horns

1. One Point
2. Two Point
3. Four Point

1 x Set of Screws

1 x Servo Horn Arm