Hyderabad, Telangana
GST No. 36BAAPA3282K1ZW
Call 08047309167 60% Response Rate
Send Enquiry
Product Brochure
| Power | 400 W |
| Input Voltage | 8.5V-50V DC |
| Input Current | 15A |
| Efficiency | up to 96% |
| Operating Frequency | 150 KHz |
| Operating Temperature Range | -40 to 90 DegreeC |
| Output Voltage | 10-60V |
| Quiescent current | 10mA |
| Dimensions | 67x28x48 (LxWxH) mm |
| Weight | 86 grams |
400W 15A DC-DC Boost Converter Step-up Module is a handy power accessory board that allows you to fine-tune the amount of power your project receives.
This converter can take an input voltage of anywhere from DC 8.5V-50V which can then be regulated to an output voltage between 10-60V continuously adjustable. With a wide input voltage range from 8.5V-50V, the Step-up converter can accurately adjust the output voltage and current.
The Boost module has 2 heat sinks that could enhance heat dissipation. Wiring is convenient with these large current 15A screw terminals.
Applications:
Package Includes:
1 x DC-DC 400W 15A Boost Converter Step-up Module Constant Current LED Driver
| Efficiency |
up to 96% |
| Input Current |
15A |
| Input Voltage |
8.5V-50V DC |
| Operating Frequency |
150KHz |
| Operating Temperature Range |
-40 to 90 °C |
| Output Voltage |
10-60V |
| Quiescent current |
10mA |
| Length |
67mm |
| Height |
28mm |
| Width |
48mm |
View Complete details
| Model Name/Number | XH-M229 |
| Input | BackXH-M229 Desktop PC ATX Power Supply Transfer Module |
| Onboard Fuse | Fuse on each output |
| Weight (gm) | 68 |
| Length (mm) | 135 |
| Width (mm) | 50 |
| Height (mm) | 25 |
| Output | -12VDC +12VDC +5VDC +3.3VDC |
This is a power supply module, which splits a standard 24 pin ATX power supply cable into four different power outputs each with separate ground and output fuses. At the output of the module, there are two binding posts for all the four outputs these binding posts can be used to power an external device. Ther is an onboard ON/OFF switch which can be used to switch ON/OFF the outputs at any given time.
Features:View Complete details
Product Brochure
| Model | Mini 360 Step Down Buck Converter Power Supply Module |
| Material | Mild Steel |
| Current | 1.8A Continuous 3A Surge Current |
| Input Voltage | 4.75 ~ 23VDC |
| Color | Green |
| Weight | 2 grams |
| Maximum conversion efficiency | 95% (5Vin, 3.3Vout ~200mA output) |
| Operational Temperature Range( DegreeC) | -40 to +85 |
| Switching Frequency | 340kHz |
| No-load output Ripple | 30mV |
| Load Regulation | +-0.5% |
| Voltage Regulation | +-2.5% |
| Length (mm) | 17 |
| Width (mm) | 11 |
| Height (mm) | 3.8 |
Mini 360 Step-Down Buck Converter Power Module use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient. This Module can be use as a DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply, various right size and weight for demanding applications (such as aviation models, etc.
1 x Mini 360 Step-Down Buck Converter Power Supply Module
| Regulator IC |
MPS MP2307DN |
| Input Voltage Range |
4.75 23VDC |
| Selectable Output Voltage |
1.0 17VDC |
| Rated Current |
1.8A Continuous |
| Maximum conversion efficiency |
95% (5Vin, 3.3Vout ~200mA output) |
| Switching Frequency |
340kHz |
| No-load output Ripple |
30mV |
| Load Regulation |
±0.5% |
| Voltage Regulation |
±2.5% |
| Operational Temperature Range(°C) |
-40 to +85 |
| Length (mm) |
17 |
| Width (mm) |
11 |
| Height (mm) |
3.8 |
| Weight (gm) |
2 |
View Complete details