Dc Motor
1.8V - 12V 2A DC Motor PWM Speed Regulator
| Current | 2A |
| Size/Dimension | 32 x 50 x 15 (LxWxH) |
| Weight | 16 grams |
| Power supply (V~) | 1.8V- 15V DC |
| Duty Cycle adjustable | 5%-100% |
| Pitch of screw terminal block | 5.08mm |
| The maximum output power | 30W |
The motor speed controller can easily provide a continuous current of 2A to your DC motor or other DC load. This motor speed controller allows controlling the direction of a DC motor using a pulse-width-modulated (PWM) DC voltage.
With a resettable fuse, it can automatically break the connection and automatically recover with a LED indicator and a rotary switch, convenient to use.
Operating instruction:-
1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram.2. Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be the supply voltage applied to the circuit.3. You can now control the speed of the motor through the potentiometer.
Features :
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
Specifications:-
| Input Voltage Range |
1.8V- 15V DC |
| The maximum output power |
30W |
| Output current |
2A(Max). |
| Output current : 2A(Max). |
2A(Max). |
| Duty Cycle adjustable |
5%-100% |
| Diameter of PCB holes |
3mm |
| Pitch of screw terminal block |
5.08mm |
| Weight (gm) |
16 |
| Dimensions in mm (LxWxH) |
32 x 50 x 15. |
3v DC motor DIY
| Type | Copper Motor |
| Phase | standard |
| Material | Mild Steel |
| Commutation | Brushless |
| Weight | 15gms |
| No. Of Poles | 1 |
This is the DC motor, which can be used in any DIY project or in the small toys. With an operating voltage range of 3V-6V this motors can be operated using two AA batteries or with a 5V USB power supply.
Applications:- Small Toys.
- DIY Projects.
- Operating Voltage Range: 3 to 6VDC
- Maximum RPM: 10000
- Shaft Diameter: 2 mm
- Weight: 15 gm per motor .
1000 Kv Bldc Motor
| Application | Drone |
| Power | 1000 W |
| Phase | Single Phase |
| Commutation | Brushless |
| Current | 4 ~ 10 A |
| Weight | 64 grams |
| Diameter | 27.5 x 30mm |
| Efficiency | 80% |
| Shaft Diameter | 3.17 mm |
This is a A2212 brushless outrunner motor specifically made to power Quadcopters and Multirotors. It is a 1000kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. With out 3S LiPo battery, our 30A ESC and our high efficiency 10" propellers these motors provide upto 800gms. Using 4 of these motors on a quadcopter with our propellers will give you a total of 3.2 kg thrust! Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
Specifications:-
- KV: 1000
- No load Current : 10 V : 0.5 A.
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 934;3.17mm
- Shaft diameter : 3.175mm.
- The steel design is capable of withstanding competitional conditions.
- Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
- Compact size.
- Offers great performance and value for money.
*Your information is safe with us.
1400 Kv Bldc Motor
| Application | Drone |
| Phase | Single Phase |
| Commutation | Brushless |
| Current | 6 ~ 12 |
| Weight | 72 grams |
| Diameter | 27.5 x 30mm |
| Efficiency | 80% |
| Shaft Diameter | 3.17 mm |
| Motor Length | 27.5 mm |
| I Deal In | New Only |
| No Load Current | 700 (mA) |
If you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project
These are the best low price drone motors available in the market.
These are our market-cracking Brushless Motors when it comes to Robu’s bestselling drone motors. The uniqueness of this BLDC Motor lies in low cost and highly satisfying performance on the fly.
Our quality control team tests some of the motors at random from each batch before setting them on sale.
The A2212 10T 1400KV Brushless Motor for Drone is best compatible or used with SimonK 30A ESC and 1045 Propeller Set.
This 1400KV brushless motor is equipped with a solid metal case which makes it reliable and durable. The A2212 10T Motor comes with a pre-soldered good-quality connector for a fast and direct connection between ESC and the motor.
Application :- Drones
- Quadcopters
- Multirotors
- RC Airplanes
- UAV
Features :
- The steel design is capable of withstanding competitional conditions.
- Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
- Compact size.
- Offers great performance and value for money.
- Smooth throttle response for best RC experience.
A2212 - 1800KV BLDC Brushless Motor
| Application | Regular |
| Phase | Three Phase |
| Commutation | Brushless |
| Current | 12A/60s |
| Size/Dimension | small 27.5 x 30mm |
| Rotation | CCW |
| No of Poles | 1 |
| Shaft Diameter | 3.175mm |
| I Deal In | New Only |
| No Load Current | 10V: 0.5A |
| Minimum ESC Specification | 18A (30A Suggested) |
| KV | 1800 |
A2212 is a brushless outrunner dc motor specifically made to power Quadcopters and Multirotors. It is a 1800kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.
Specifications:-
- KV: 1800
- No load Current : 10 V : 0.5 A.
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 934;3.17mm
- Shaft diameter : 3.175mm.
- Minimum ESC Specification: 18A (30A Suggested)
| Version 3.0 CNC Shield |
| 12864 Graphic Smart Controller LCD Display for RAMPS 1.4 |
| RAMPS 1.4 2004 LCD Smart Display Controller Module |
| Microstepping Motor Driver DRV8825 With Heatsink |
| A4988 Microstepping Motor Driver With Heatsink |
| L293D Based Arduino Motor Shield |
| Brushless Motor D2826 1100 KV To 1800 KV |
| 2 inch Thermal Printer Mechanism |
| 3" Thermal Printer Mechanism |
| 1" Thermal Printer Mechanism |
| Hoin 58mm Bluetooth and USB Thermal Printer |
| RP203 2 Inch Thermal Printer |
100 RPM BO Motor - L Shape Single shaft
| Minimum Order Quantity | 100 Piece |
| Application | Regular |
| Commutation | Brushless |
| Phase | L Shape |
| Diameter | 5.5mm(Double D - type) |
| Material Used | fibre |
The 100 RPM L-Shape BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
We are supplying the range BO(Battery Operated) Motors with varying RPM and Gear-Box arrangement, click on the name below for more information
BO Motors .
Features :- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
- Production Capacity: standard
Explore more products
GY-273 HMC5883L Triple Axis Compass Magnetometer Sensor Module
Get Best QuoteHC-05 Bluetooth Module with TTL Output
Get Best QuoteESP8266 Wireless module NodeMCU V3
Get Best Quote200 RPM Dual Shaft BO Motor - Straight
Get Best QuoteUSB to RS485 TTL Serial Converter Adapter FT232 Module
Get Best QuoteSTC-1000 DC12V Digital Temperature Controlled Thermostat Switch
Get Best Quote